MountIt! Standing Desk Converter With Monitor Mount Review
1-year limited warranty on products purchased from MountIt!
13, 15, 17, 19, 20, 21, 23, 24, 27, 29, 32 inches
Top platform: 23.5" x 15.75"
Keyboard tray: 26.75" x 11.75"
Base: 19.5" x 19.5"
Use discount code mountit18 for 20% first order
Buy on Mount-It.com
Comes with a free monitor arm that helps adjust your monitor height at any level. A roomy keyboard tray mounted on a heavy L bracket as opposed to being screwed into a particle board desktop.
Small work surface does not allow space for a laptop. The keyboard tray is non-adjustable.
Editor’s Note: The following is a “forensic” review. We have not yet had the opportunity to test the MountIt! in our labs. When we have been unable to obtain a review unit from the manufacturer and when there is demand from our readers for information on the product, we evaluate publicly available information that the manufacturer and users of the product have provided online. We then apply our extensive experience evaluating standing desk converters and make an informed projection of how well this product will stack up against other products in its category. As soon as we are able to conduct a hands-on evaluation of the product or learn new information about it, we will update this review. Learn more about our review process at Anatomy of a Review.
Full Review Coming Soon
MountIt! Standing Desk Converter With Monitor Mount (MI-7913) is a bargain if you’re looking to invest in a desk and not much else that typically makes up a good standing workstation. At $143.99, you get a Z lift gas spring desk converter that operates within 6.5 and 18 inch height range and a free monitor mount that supports a wide spectrum of monitor sizes and tilts ergonomic 15 degrees up and down.
If you’re looking for a small stand up desk converter, this one may be the right choice. Beware, though, because the base size isn’t the only important measurement. You have to account for the work surface and the keyboard tray. If your desk is 24” deep the unit will hang over it.
The best redeeming feature of this desk converter is that it solves the main issue of monitor height adjustment, making for great ergonomics. Since many consumers would rather not spend additional funds on a monitor arm, they have to utilize rigid supports like boxes and books. This arm has an adjustment and tilting range. It also rotates 360 degrees, making for a better standing workstation.
This is a unique product in that it is much more affordable than most post-and-base converters. The free monitor mount may not be flexible to go from side to side, but it gets the job done, adjusting the monitor height as the user switches from sitting to standing.
Users report general satisfaction with the product, although the design shows a few minor trade offs like a non-tilting keyboard tray and a small work surface. The tray is roomy and provides enough space for a keyboard and a mouse. It comes attached to a heavy L bracket, which makes for more stable typing. Additionally, the unit is equipped with a soft wrist pad to help reduce the wrist fatigue.
Monitor Arm Specs:
Single monitor arm holds 13, 15, 17, 19, 20, 21, 23, 24, 27, 29, 32 inch monitors
VESA compatible: 75 x 75 mm and 100 x 100 mm
Weight Capacity: 22 lbs
Tilt: -15 to +15 Degree
Swivel: 360 Degree
Rotate: 360 Degree
VESA head height can be adjusted up to 1” to perfectly align the height of monitors.
WorkWhileWalking is in the process of researching this product—we have not yet tested it in our lab. These ratings are not final, and are subject to change at any time.